9551011 ILLUSION / EMERALD Jacquard Upholstery Fabric (2022)

Product Specification - Abrasion Rating?

A double rub rating is not applicable to a fabric used for bedding, curtain, drapery or other applications where the fabric is not subjected to abrasion. A double rub rating applicable to fabric used for upholstery is obtained from an industry test that measures fabric resistance to typical abrasion that is expected from the use of upholstered furniture.

General Guidelines for Residential Upholstered Furniture:

Under 5000 Double Rub Rating or code "LD" is suitable for home decor light duty upholstery use (not daily use, more for decorative appeal).
5000 - 14900 Double Rub Rating or code "MD" is suitable for medium use home decor upholstery applications such as living rooms.
15000 - 29900 Double Rub Rating or code "RD" is suitable for everyday regular and heavy use home decor upholstery applications.
30000 and Above Double Rub Rating or code "HD" is suitable for residential and commercial upholstery subjected to "extreme use".
Code "LDO" indicates a selection of fabric that is only recommended for 'light duty outdoor' upholstery applications where cushions do not receive regular use and can be easily removed and stored away from harmful UV light when not in use. These selections are not intended for normal indoor furniture upholstery as they are not constructed to withstand the abrasion of regular use. If you are in need of a more durable outdoor fabric that can also be used for indoor upholstery, we recommend a High Performance Indoor-Outdoor Fabric from Sunbrella, Bella-Dura and Covington.

General Guidelines for Commercial Upholstered Furniture:

The surface wear of a fabric caused by rubbing and contact with another fabric. Association For Contract Textiles "ACT" GUIDELINES General Contract Upholstery ASTM D4157-02 (ACT approved #10 Cotton Duck) 15,000 double rubs Wyzenbeek method ASTM D4966-98 (12 KPa pressure) 20,000 cycles Martindale method Heavy Duty ASTM D4157-02 (ACT approved #10 Cotton Duck) 30,000 double rubs Wyzenbeek method ASTM D4966-98 (12 KPa pressure) 40,000 cycles Martindale method End use examples of heavy-duty installations where upholstery fabrics rated at 30,000 double rubs should be appropriate are single shift corporate, hotel rooms/suites, conference rooms and dining area usage.

ACT acknowledges that there are extreme wear situations that may require higher levels of abrasion resistance. End use examples that may require higher than 30,000 double rubs include: 24 hours transportation terminals, 24 hour telemarketing, 24 hour healthcare emergency rooms, 24 hour casino gambling areas, and such public gathering places as theatres, stadiums, lecture halls and fast food restaurants. It is strongly suggested that double rubs exceeding 100,000 are not meaningful in providing additional value in use. Higher abrasion resistance does not necessarily indicate a significant extension of the service life of the fabric.

The Wyzenbeek and Martindale tests are the two methods commonly used to predict wear-ability. Actual performance is determined by many factors such as fiber content, weaves, finishes, furniture design, maintenance, cleaning, and usage. Durability of an upholstery fabric is a complex interaction (combination) of a number of performance tests that, in addition to abrasion, includes seam slippage, pilling, tensile strength, and usage. There is no correlation between the Wyzenbeek and Martindale tests so it is not possible to estimate the number of cycles that would be achieved on one test if the results from the other test were known.

TEST METHODS ASTM D4157-02 Oscillatory Cylinder (Wyzenbeek) The ASTM D4157-02 is a test of the American Society of Testing and Materials. A Wyzenbeek machine is used for this test allowing samples of the test fabric to be pulled tight in a frame and held stationary. Individual test specimens cut from the warp and weft direction are then rubbed back and forth using an ACT approved #10 cotton duck fabric* as the abradant. The number of double rub cycles achieved before two yarn breaks occur or noticeable wear is observed is recorded as the fabrics abrasion rating.

The wire screen abradant is recommended by ACT for use with vinyl and polyurethane coated upholstery and may also be used for testing 100% olefin fabrics.

ASTM D4966-98 Martindale The ASTM D4966-98 is a test method of the American Society of Testing and Materials (ASTM). This is an oscillating test. Fabric samples are mounted flat and rubbed in a figure eight like motion using a piece of worsted wool cloth as the abradant. The number of cycles that the fabric can endure before fabric shows objectionable change in appearance (yarn breaks, pilling, holes) is counted. Number of cycles determines abrasion rating.



OP - OUTDOOR PERFORMANCE - Remove as much loose dirt as possible. A mild detergent mixed with lukewarm water should be tried first to clean the fabric. For more stubborn stains, bleached can be used as follows: Prepare a solution of one cup of bleach and one fourth cup of mild soap per gallon of cold to lukewarm water. Spray the solution on entire area to be cleaned and allow 15 minutes to soak into the fabric. Clean the entire surface area with a sponge, clean towel or very soft bristle brush to avoid abrading the fabric. Rinse thoroughly to remove all soap residue, then air dry. For severe cases of mold/mildew growth, bleach quantities may be increased. It is best to clean the entire surface area of the fabric to avoid water rings and stains.

R - This fabric can be cleaned with almost any household cleaner -- even pure bleach will not damage this fabric! Most stains can be blotted and cleaned with just water, but we recommend mixing some bleach in the solution to kill any bacteria that may grow. Whatever cleaning product you use, it is important to thoroughly rinse the fabric with clean water and allow the fabric to air dry. Fabrics with a R cleaning code are manufactured for upholstery use and have a fabric back coating for extra strength. Therefore, do not machine wash as this could damage the backing.

RP - This multi-purpose fabric is suitable for slipcover applications and has no fabric back coating. Fabrics that are designated with a RP cleaning code are machine washable. This fabric is not only soft and beautiful, but also durable, inherently stain resistant, and bleach cleanable...even dark colors. This fabric should be washed on a delicate cycle with cold water accompanied with laundry detergent and bleach, if necessary. After the wash is complete, dry your fabric on LOW heat for no more than 10 minutes. Exposure to high temperatures will damage olefin. Also, do not iron. For tougher stains pretreat soiled area with a bleach and water mixture.

S - SOLVENT CLEANER - Spot clean with a mild water-free solvent or dry cleaning product. Clean only in a well ventilated room and avoid any product that contains carbon tetrachloride or other toxic materials. Pretest a small area before proceeding.

W - WATER BASED CLEANER - Spot clean using the foam from a water-based cleaning agent such as a mild detergent or non solvent upholstery shampoo product. Apply foam with a soft brush in a circular motion. Vacuum when dry. Pretest a small area before proceeding.

WS - WATER-SOLVENT CLEANER - Spot clean with a mild solvent, an upholstery shampoo, or the foam from a mild detergent. When using a solvent or dry cleaning product, follow instructions carefully and clean only in a well ventilated room. Avoid any product that contains carbon tetrachloride or other toxic materials. Pretest a small area before proceeding.

X - VACUUM ONLY - Clean this fabric only by vacuuming or light brushing to prevent accumulation of dust and grime. Water-based foam cleaners or solvent-based cleaning agents of any kind may cause excessive shrinking, staining or distortion of the surface, and therefore should not be used. These recommendations and codes were developed by fabric specialists. However, because of the various ways that fabric can be stained or damaged, there is no guarantee that the results will be completely successful. These suggestions are provided as a service only. To help prevent overall soil, frequent vacuuming or light brushing to remove dust and grime is recommended. Use a professional furniture cleaning service when an overall soiled condition has been reached.

Most of our fabric selections (with the exception of faux leather and leather) are eligible for our free shipping coupon promotion and the item page will indicate eligibility by the display of a coupon icon: 9551011 ILLUSION / EMERALD Jacquard Upholstery Fabric (1). To qualify for free shipping, which will ship via FedEx Ground service, an eligible item must be included on a fabric purchase of $99 or more and the shipping destination must be a US state other than Hawaii or Alaska. Simply enter coupon code freeship2 on the shopping cart page and be sure to select free shipping as your shipping choice.

Note- Samples are free of shipping charges to all US & Canadian destinations via First Class US Mail, no coupon is required.

9551011 ILLUSION / EMERALD Jacquard Upholstery Fabric (2) We apologize that our order processing has not been consistent during this pandemic and please know that we are working very hard to return to quick and consistent order processing. Our distribution center is operational and is currently processing orders as indicated below:

In Stock Yardage Orders are being processed for shipment from our Atlanta Distribution Center within 2 business days.

Special Orders are being processed for shipment from our Distribution Center or the Fabric Mill within 2-10 business days (each individual fabric page displays a specific estimate of the days until shipment). Some items will display that the mill is temporarily closed due to the pandemic and in those cases we are unable to provide an expected special order shipping date but will keep you posted.

Sample Orders are being processed for shipment within 7 business days.

The supplier of this item has temporarily closed its distribution center due to the coronavirus pandemic. If you place a yardage order we are unable to provide an expected shipping date but your order will be first in queue when the mill reopens and we will keep you posted and will notify you before shipping.

We apologize for the inconvenience and hope to return to normal service soon.

The measurement of a fabric's performance when it is exposed to specific sources of ignition. Note: Association For Contract Textiles "ACT" guidelines specify different flammability tests dictated by the intended end use for the fabric.

California Technical Bulletin #117 Section E –
Class 1 (Pass)

Direct Glue Wallcoverings
ASTM E 84-03 (Adhered Mounting Method) –
Class A or Class 1

Wrapped Panels and Upholstered Walls
ASTM E 84-03 (Unadhered Mounting Method) –
Class A or Class 1

NFPA 701-89 (Small Scale)* – Pass*NFPA 701-99 Test #1 is being phased in at this time, but is not yet cited in all relevant codes. Therefore, the small-scale test remains the ACT standard until further notice.

NFPA 701-99 (Small Scale)
California TB #117 Section E

California Technical Bulletin #117
Section E* – Class 1 (Pass)
The California TB #117 Section E is a test method of the California Bureau of Home Furnishings and Thermal Insulation. It is a vertical flame test measuring the ease of ignition and the burning rate when a small open flame hits the surface of the test fabric for 1 second. A Class 1 (Pass) rating is assigned if:
1. A 5.0" section of the fabric is consumed in 3.5 or more seconds (less than 3.5 seconds is a failure). For raised surface fabric, the minimum burn time is increased to 4.0 seconds.
2. The fabric does not ignite.

ASTM E 84-03 Tunnel Test
The ASTM E-84 test is a test method of the American Society for Testing and Materials (ASTM). Commonly called the Tunnel Test, this test can be performed under two different methods adhered or non adhered where the only difference is in specimen preparation:
Adhered: The fabric is bonded to either a CA board substitute or gypsum board. This is the prescribed method for wall coverings whose actual use will be adhered .
Non adhered: If the fabric is a panel fabric or upholstered walls, it is tested in a frame without being bonded to any other material.
In each instance (adhered and non adhered), the fabric is placed in the ceiling of the test tunnel and subjected at one end to a high intensity flame which spreads over the first 4.5 feet of the 24 foot test specimen.

The distance of flame front progression and total burning time are used to calculate a flame spread index . Smoke monitors are used to calculate a smoke developed value. The flame spread index and smoke developed value are calculated from the results of the test fabric compared to the characteristics of cement board and red oak materials resulting in the indexes.

Typically, the code classes are as follows:
Class A: Flame Spread Index of 25 or less and Smoke Developed value of 450 or less
Class B: Flame Spread Index of 26 to 75 and Smoke Developed value of 450 or less
Class C: Flame Spread Index of 76 to 200 and Smoke Developed value of 450 or less

Caution: The ASTM E 84 test is only valid if the textile or vinyl wall covering is used in a sprinklered occupancy. If not, the Room Corner Test (NFPA 265 for textiles; and NFPA 286 for vinyl) is mandated in many jurisdictions.

NFPA 701-89 (Small Scale)
The NFPA 701-89 (Small Scale) is a test method of the National Fire Protection Agency. It measures the ignition resistance of a fabric after it is exposed to a flame for 12 seconds. The flame, char length and flaming residue are recorded. The fabric will pass the test if all samples meet the following criteria (if one sample fails the fabric fails):
1) An after flame of less then 2.0 seconds
2) An average char length of less than 6.5" or an individual specimen of 7.5".
3) The specimen does not continue to flame after reaching the floor of the test chamber <

Note: NFPA 701-99 Test #1 is being phased in at this time, but is not yet cited in all relevant codes. Therefore, the small-scale test remains the ACT standard until further notice

Canadian and other International buyers are responsible for all applicable brokerage fees and duties which will be collected at delivery.

Colorfastness to Light is a material's degree of resistance to the fading effect of light.

Association For Contract Textiles "ACT" GUIDELINES

Upholstery: AATCC 16 Option 1 or 3-2003 Grade 4 minimum at 40 hours.

Wrapped Panels and Upholstered Walls: AATCC 16 Option 1 or 3-2003 Grade 4 minimum at 40 hours.

Drapery: AATCC 16 Option 1 or 3-2003 Grade 4 minimum at 60 hours.

TEST METHOD: AATCC 16 Option 1 or 3 – 2003*

The AATCC 16 Option 1 and 3 are test methods of the American Association of Textile Chemists and Colorists (AATCC). ACT recognizes both methods where the only difference is the light source being used. In AATCC 16 Option 1 a Carbon-Arc lamp is used as the light source and in AATCC 16 Option 3 a Xenon-Arc lamp is used. Under both methods a strip of fabric (part of which is protected by a special paper card) is placed in a fadometer and exposed to 40 hours of accelerated fading units (AFU). After the exposure the difference in color between the exposed and protected parts of the fabric are compared to the AATCC gray scale and the degree of fading is rated.

Grade 5 = no fading
Grade 4 = slight fading
Grade 1 = high degree of fading

California's Proposition 65 entitles California consumers to special warnings for products that contain chemicals known to the state of California to cause cancer and birth defects or other reproductive harm if those products expose consumers to such chemicals above certain threshold levels. When a manufacturer informs us that this warning is applicable to their product we will indicate such among the specifications on a specific item page. The general Proposition 65 notice is as follows: WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov

What is a Railroaded Fabric?

Railroaded fabrics are simply fabrics that have designs turned "sideways" on the roll. The process was developed to aid furniture manufacturers wishing to cut and sew covers on furniture without seams. Since most fabrics woven are approximately 54" wide, any furniture piece wider than 54" would require seaming two pieces of fabric together. Railroading solves this dilemma, now a cushion piece can be covered without seams no matter what the width. Railroaded fabric is very desirable by designers since they can be more creative. When using a railroaded product for drapery, be aware of the panel size in relation to the design.

9551011 ILLUSION / EMERALD Jacquard Upholstery Fabric (3)

You will have the option to select various levels of expedited time definite shipping service during checkout. The maps below shows expected transit days for the least expensive sghipping options of USPS Priority Package Shipping (1-3 days) and for FedEx Ground & Home Deliver service (1-7 days continental US) determined by your distance from our Atlanta Distribution Center. Please be aware that transit days are Monday - Saturday for most home deliveries and Monday - Friday for most business deliveries. Our Canadian customers can select UPS Standard Service which is approximately 6-7 transit days.

9551011 ILLUSION / EMERALD Jacquard Upholstery Fabric (4)

9551011 ILLUSION / EMERALD Jacquard Upholstery Fabric (5)

We have entered into agreements with several of our suppliers allowing us to special order fabric for our customers directly from the mill when we otherwise do not stock or have a very low "in-stock" quantity at our Atlanta distribution center. Special order availability will be indicated on each fabric if it is applicable. The shipping date of a Special Order is most often within 2-10 business days, please look on the specific fabric page as the expected shipping time is noted.

Special Orders may be subject to a minimum yardage purchase and if so the minimum will also be indicated on the specific fabric page. It is very important to have seen a sample as special orders are non-cancellable and not returnable to the mill. To place an order for special order yardage please select the option to order yardage, enter the yardage needed for your project in the quantity box and click the add to cart button.


Is jacquard fabric good for upholstery? ›

These stain-resistant jacquard upholstery fabrics provide texture and style to any living room or space. These jacquard upholstery fabrics are great for your sofa, chair, pillow, headboard, and upholstery projects.

What is the best grade of fabric for a sofa? ›

The higher the 'Martindales' the higher the value or 'toughness' of the fabric and the more resistant it is to abrasion. For example, for domestic sofas, you want a fabric that measures between 15,000–25,000. Heavy use will be 25,000–30,000, this would be everyday use and would be ideal for families.

What is a commercial fabric? ›

Commercial textiles defy conventional definitions of sustainability. Designed to enhance and perform in environments that demand varying degrees of durability, they are the products of a manufacturing process that is traditionally heavy in the use of water, energy, and chemicals.

What is the most durable fabric for upholstery? ›

Microfiber is one the most durable fabrics, besides leather. Check to make sure it is 100 percent polyester so that it does not stain, fade, or leave water marks if you splash water on it. It is easy to clean and stands up well.

What is jacquard upholstery? ›

Jacquard Fabric - Woven Fabric Designs | Upholstery, Drapery & Curtain Fabric. The hallmark of a jacquard fabric is that the design is woven into the fabric itself, rather than stamped, printed, or embroidered on top of it.

What couch material lasts the longest? ›

Leather: This material is known as one of the most durable and sophisticated materials out there. It is a favorite for people with kids and pets, as it tends to withstand the wear and tear of everyday life while also being incredibly easy to clean.

How do you choose fabric for upholstery? ›

How to choose upholstery fabric for your sofa!
  1. Look for the number of rubs competed on the abrasion test. A fabric should be 15,000 or higher for residential use.
  2. Woven fabrics last longer than prints.
  3. Look for fabrics with tight weaves.
  4. Fabrics made of olefin (like Revolution is!) are generally very durable.

What is the most durable sofa? ›

Couches that have a dense hardwood frame (like maple, walnut or teak) are the most durable. Tightly woven textiles and leather are long-lasting fabric choices.

What is contract grade upholstery fabric? ›

Contract fabrics are treated with a finish for increased stain repellency, cleanability, durability and warranty. They differ from retail fabrics for their superior ability to perform in high-use areas. A number of factors go into determining a contract fabric grade.

What is the best fabric for commercial use? ›

Polyester- Constructed from artificial fibres, Polyester is a high performance fabric that's extremely durable and wears exceptionally well in commercial environments.

What makes a fabric commercial grade? ›

Sounds a little complicated but the scoring system basically breaks down as follows for contract grade fabrics: 15,000 doublerubs is the minimum result for commercial applications. At 15,000 double rubs or greater, fabrics in this category are suitable for many contract or commercial applications.

What kind of fabric is best for reupholster a chair? ›

Microfiber: Made from polyester, this popular upholstery fabric has a velvet-like texture but is much more durable. It resists water, stains, and fading, so it's great for high-use living areas. Nylon: Rarely used alone, nylon is usually blended with other fibers to make it one of the strongest upholstery fabrics.

What type of fabric is used for upholstery? ›

Probably the most durable fabric for upholstery is leather. Leather is a great option for high traffic areas while looking comfy. Leather is also recommended for those who have animals or pets. It is very easy to vacuum hair out of and lasts for a long time.

How do you choose fabric for upholstery? ›

How to choose upholstery fabric for your sofa!
  1. Look for the number of rubs competed on the abrasion test. A fabric should be 15,000 or higher for residential use.
  2. Woven fabrics last longer than prints.
  3. Look for fabrics with tight weaves.
  4. Fabrics made of olefin (like Revolution is!) are generally very durable.

What kind of fabric is jacquard? ›

What Is Jacquard Fabric? Jacquard fabric is a textured fabric that has complex patterns woven into it, rather than printed, dyed, or embroidered on top. Jacquard weaving has its origins in sixth-century Italian brocade, and it remains one of the most popular types of fabric to this day.

Top Articles

Latest Posts

Article information

Author: Dr. Pierre Goyette

Last Updated: 12/24/2022

Views: 6800

Rating: 5 / 5 (50 voted)

Reviews: 89% of readers found this page helpful

Author information

Name: Dr. Pierre Goyette

Birthday: 1998-01-29

Address: Apt. 611 3357 Yong Plain, West Audra, IL 70053

Phone: +5819954278378

Job: Construction Director

Hobby: Embroidery, Creative writing, Shopping, Driving, Stand-up comedy, Coffee roasting, Scrapbooking

Introduction: My name is Dr. Pierre Goyette, I am a enchanting, powerful, jolly, rich, graceful, colorful, zany person who loves writing and wants to share my knowledge and understanding with you.