DIY seamless pleated fabric lampshade – Answering To (2022)

Making your own pleated lampshade will save you money and give your space a unique layer of charm. This tutorial is an easy way to update boring lampshades, and you can have a custom look that is easy on the budget in just a few hours. fabric pleated lampshades have been on my radar ever since I incorporated

English inspired design elements into our traditional Moderna summer house. They are very textured, interesting and often colorful. I just love them! But these dolls are expensive… it’s expensive, like from $150. Now that they are on a diet, they seem completely calm because I understand why.

Although this is a relatively easy DIY, it is time-consuming. However, I don’t have the budget to buy them in advance, so I figured out how to make my own seamless pleated fabric lampshades for the bedroom renovation of Hannah’s NYC Apartment Meets English Cottage. It took a few hours, but it saved me hundreds of dollars, so it was worth it in my book.

Click here to learn how to make your own pleated fabric lampshade.

* This post contains affiliate links. I receive a small commission for each purchase made through these links, but this does not affect the cost to you, the consumer. Thank you for supporting the Wildflower Home blog.

DIY No Sew Pleated Fabric Screen

Materials Required:

Measure the Fabric and Cut It / You can measure the screen from top to bottom and then cut the fabric accordingly or hold the fabric against the screen to determine where you need to cut it (for example, I did it). After cutting the first length, use this part as a pattern to cut two or three more lengths. For laying, you will need a total length of 3-4 and a little surplus.

Fold and Glue the Fabric to the Top Edge of the Curtain / After putting this piece in place, you can start folding the top of the curtain. Place a hot glue stain on the fabric where you want the fold to lie, and then use your fingers to make a small fold in one direction and hold it tightly for a second or two.

Repeat over and over again until you reach the end of the length of the fabric you are working with. You can choose to fold the folds in both directions (right or left) and it will look good as long as you are consistent.

Keep gluing, gluing and gluing. If you notice that the glue does not seep through the fabric to adhere to the curtain, apply a line of glue to the edge of the curtain (under the folds) and press down so that the entire pleated fabric remains in place.

Fold and Glue the Fabric to the Bottom Edge of the curtain / After all the folds at the top are completely glued, start making the folds at the bottom. When gluing the folds on the bottom edge, be sure to tighten the fabric. I don’t want that fabric to be loose like yours,

You.

When gluing the folds under the curtain, stretch the fabric so that the folds form beautifully and stay in place.

After one piece of fabric is completely curled and glued to the top and bottom, you are ready to start the process from the beginning with the next piece of fabric. October |_| * When adding lengths of October fabric, you do not need to apply a line of glue to the lampshade and fasten the end of the fabric. You can fold this tip under it, put a dot of hot glue on top, in the middle and under the edge of the fabric and mix it with other folds.

You can’t even tell where one piece of fabric ends and another begins, if you stick the tip under it and hide it like a fold.

Keep curling and gluing around the curtain until you get to where you started, making sure to stretch all the folds along the way and secure everything to the curtain with hot glue.

Trim the excess / Cut the excess fabric with scissors. You want a nice, clean border to place your ornament on. Jul:

Make an ornament for the lampshade / Measure the top and bottom edges of the lampshade and cut two pieces of masking tape of the same length. Next, cut two long thin pieces of fabric of the same length and place them on the ironing board. Place pieces of bias tape on top of them.

Fold the fabric over the bias tape so that there are enough extras to tuck under the pretty edges. Basically, you will want to imitate the bias tape with your fabric. The press is very soft.

This is what your ornament should look like when you’re done…

After gluing the ends of the lining behind the screen, done!

Admire / Always take a step back and admire your work. Or if you’re like me, walk away and come back to ooh and ahh for your project a few hours later. I struggle so much with imperfections that it helps if I come back later to admire my work (is it just me? ).

I was so happy the night I finished these DIY seamless pleated fabric shades because Jeff came to Hannah’s room and said, “Wow, these are remarkable! It’s like you bought them” “Sometimes it takes eyes that don’t belong to you to see the flaws that you know are there.

Whatever the cost, admire your work because you have saved yourself hundreds of dollars and have created beautiful, exclusive and unique lampshades that no one else can have.

Performance: Print pleated fabric Pleated fabric lampshade in 2 hours Active time: 3 hours total time 5 hours Difficulty Easy lampshade materials

Fabric

P hot melt glue sticks |_| Wide bias tape tools hot glue gun

DIY lampshades without sewing Scissors and Fabric cutting instructions preparation time Measure: measure the lampshade and, accordingly, the shade fabric against the fabric or just wait and need to cut, you can determine where to cut. After cutting the first length, use this part as a pattern to cut two or three more lengths. For laying, you will need a total length of 3-4 and a little surplus. Attach the fabric to the back of the curtain: Run a line of hot glue through the back of the curtain where you want the fabric to start and end. Next, place the fabric in this hot glue and press it down to make sure it is secure. Once you have a piece of Cake and glue it somewhere on the fabric, you can start pleating the top shade on top of the Edge. Place a hot glue stain on the fabric where you want the fold to lie, and then use your fingers to make a small fold in one direction and hold it tightly for a second or two. Repeat this over and over again until you reach the end of the length of the fabric you are working with. You can choose to fold the folds in both directions (right or left) and it will look good as long as you are consistent. After all the folds on the top are completely glued, start making the bottom shade the bottom edge of the cake and glue it to the fabric. When gluing the folds on the bottom edge, be sure to tighten the fabric. Continue curling and gluing around the shadow until you get to where you started, be sure to stretch all the curls along the way and fix everything to the shadow with hot glue. Cut off excess: Use scissors to cut off excess fabric. You want a nice, clean border to place your ornament on. July: Make an ornament for the lampshade: Measure the edge of the lampshade and cut a piece of bias tape of this length. Next, cut out a long thin piece of fabric of the same length and place it on the ironing board. Place the bias tape on top. Fold the fabric over the bias tape so that there are enough extras under the pretty edges. Basically, you will want to imitate the bias tape with your fabric. The press is very soft. Install the lampshade molding: After cutting and pressing both pieces of molding, use your hot glue gun to glue them on the top and bottom of the lampshade, taking care to cover the ends of the pleated fabric. Do not try to tighten the edge with pre-tensioning tape. It does not give a crispy edge and looks clumsy. Just lay it flat and glue the loose fibers together to make it look beautiful. October When adding lengths of October fabric, you do not need to apply a line of glue to the lampshade and glue the end of the fabric. You can fold this tip under it and mix it with other folds.

Happy birthday!

You might also like

Latest Posts

Article information

Author: Rev. Porsche Oberbrunner

Last Updated: 08/28/2022

Views: 6204

Rating: 4.2 / 5 (73 voted)

Reviews: 80% of readers found this page helpful

Author information

Name: Rev. Porsche Oberbrunner

Birthday: 1994-06-25

Address: Suite 153 582 Lubowitz Walks, Port Alfredoborough, IN 72879-2838

Phone: +128413562823324

Job: IT Strategist

Hobby: Video gaming, Basketball, Web surfing, Book restoration, Jogging, Shooting, Fishing

Introduction: My name is Rev. Porsche Oberbrunner, I am a zany, graceful, talented, witty, determined, shiny, enchanting person who loves writing and wants to share my knowledge and understanding with you.